Motus Meets Lamborghini Aventador

Here’s ANOTHER spectacular build from Motus Custom Ops, featuring a one of a kind factory-custom PPG tri-coat Lamborghini paint over a full carbon fiber body kit. The deep metallic-pearl yellow compliments the carefully selected raw carbon areas which adds another level of stunning beauty to the overall Motus design.

The stock 180hp American V4 MSTR wasn’t enough for this customer, who chose to order his new ride with a very specific custom paint direct from the design department at the factory in Birmingham, Alabama.

The MSTR comes equipped with carbon fiber BST – BlackStoneTek wheels, carbon fiber Akrapovic Exhaust SystemBremboÖhlins USAPirelliMoto Angel GT’s, Rizoma handlebars, Sargent Cycle Products seat, National Cycle windscreen and a LOT more.

Hand welded chromoly chassis, hand welded stainless steel headers, GIVI luggage, center stand, cruise control, LCD/TFT display. Congrats to Kurt O and Wide World Powersports – Different Horse Customs in Wayne, NJ!

 

 

Motus of New England goes racing.

Rob Swartz of Motus of New England is well known in the “go fast”world. As purveyor of Rob’s Dyno Services in Massachusetts, riders looking to optimize engine performance send Rob their motorcycles from all over the country.

When Rob inquired about becoming MA’s first Motus dealer, we were thrilled to get him on board. Especially after we determined that we are kindred spirits in many ways.

Case in point: the first MSTR shipped to Motus of New England is titled to Rob as his personal bike. With less than 50 miles on the odometer, Rob safety wired the bike and rode it the 450 miles from Gardner, MA to Loring Air Force Base in Maine. Contending with high winds and snow flurries, Rob was able to get a couple of good passes in to set two land speed records in 1650 P-PP/4 classes.

Rob is an obsessive performance freak, so we would expect to see a lot more from Motus of New England Racing in the future.

We strongly recommend removing luggage before setting speed records, Rob only did so after reaching 150mph. 

Impressive for just a few passes on a brand new bike. 

 

The Motus Story – Part 4: Growing Pains

Insights: a new series from the pen of moto-adventurer Neale Bayly.

MST-01 test mules looked good, but were far from production ready. 

In the autumn of 2012, the last thing anyone at the fledgling Motus Motorcycles expected was to be, in part, victims of some initial success. Motorcyclists and media had applauded the two MST-01 prototypes from Florida to California and the industry was abuzz about first American V4 sport-touring motorcycle. The questions quickly centered on “How much?” and “When can I get mine?” and Motus co-founders Lee Conn and Brian Case were often seen as being coy when asked about pricing and availability. Truth was, they had no idea yet.

Every waking minute for the past three years had been spent building and testing prototypes. The mission at Motus was clear from the start to build the most exquisite machines possible and never, ever cut corners.  But, given the magnitude of the project and the small size of the team, the they found themselves with more questions than answers and the chorus of media, anxious customers and bankers was growing louder.

Suspension and chassis testing at Barber with Pratt&Miller and Öhlins.

Until Motus put big “PROTOTYPE” stickers on the bikes, dealers and buyers perceived they were ready for production. Designing and sourcing hundreds of proprietary components was challenging and time consuming. Once, when sourcing 300 sidestand cut-out switches, the manufacturer replied with a quote for 300 thousand. The sheer enormity of building a new American motorcycle company from scratch was completely lost on the public, but was happening feverishly behind the scenes at Motus.

Tough decisions were in store as first slow steps turned into a jog. Leading the technical teams, Brian added cruise control and a ride-by-wire electronic fuel injection, but aborted gasoline direct injection. He added a full-color LCD/TFT display and selected production colors. Sargent made final seat shape revisions.

Replacing the GDI system with a 3D printed port fuel intake prototype. 

The aluminum foundry and engine assembly facility were initially in Texas, but after a serious “lights-out” fire at a machine shop and repeated slowdowns at the foundry, the production casting was moved to Indiana and all engine assembly was brought in house to Motus HQ in Birmingham.

Challenges:  this CNC caught fire while milling an engine block mold.  

While Brian worked tirelessly on refining details of hundreds of mechanical components, he simultaneously oversaw production line setup. Lee was pulling double shifts on everything from marketing to part sourcing as he took deposits from customers, signed up dealers and worked with investors. By 2012, Motus boasted just four employees and durability tests were performed by seasoned industry veterans as ongoing upgrades and refinements continued all year. And throughout these long, hard days the same questions kept coming and the answers to them were getting harder to fend off.

Many, many months of testing and development.

The lengthy certification process to get EPA and CARB certificates isn’t a sexy media story. Neither is the story of tens of thousands of durability miles or that some certain part is being revised for greater reliability or that a machine shop caught fire. Journalists were eager to test the production motorcycles. Dealers were looking for pricing and customers a due date.

By the fall of 2013, Brian, Lee and their staff once more took the historic drive to Barber with their motorcycles. This time it was to display five production intent bikes at the Vintage Festival, so the world could see, hear and ride a finished Motus. Behind closed doors, they held their collective breath as they waited for the certificates of approval to arrive.

Part 1: Validation here
Part 2: Awakening here
Part 3: Emergence here

 

 

MOTORCYCLIST: Hurricane ‘Merica

Click the image or here for the full article.

Like a Patek Philippe chronograph in a world awash with plastic Casios, the MST is built to be passed along to your heirs in fine running order. Rangy, wellfinished, comfortable, and swift, the Motus MST won’t override the impulses emanating from your helmet. It will communicate those directly to the pavement, mediated solely by your skills. 

If you’re ready for that, Motus is building you a bike right now. 

-Jack Lewis, Motorcyclist, Jul/Aug ’17

 

 

The Motus Story – Part Three: Emergence

Insights: a new series of stories from the pen of moto-adventurer Neale Bayly.

Against the backdrop of MotoGP machines on full throttle, Motus co-founders Brian Case and Lee Conn would once again talk themselves hoarse as they met thousands of race fans at Laguna Seca in July of 2011. Over the course of the three-day event, they told the story of this new and radical American V4 sport-touring machine time and again. It displaces 1650cc. It has push rods. It makes around 180 horsepower and 125 ft.lbs. of torque. It’s built in America. Pricing and availability are…TBD.

While the questions or the story didn’t change, a profile emerged of the most interested inquirers. Serious motorcycle aficionados, most with multiple machines, usually with a European leaning, and all of them extremely excited to see and hear the Motus run.

The MST-01 unveiling at the Barber Motorsports Museum

Unveiling two prototypes some weeks earlier at the Barber Vintage Motorsports Museum to a close group of press, peers, and industry professionals, Motus’ small team put the enormity of what lay ahead briefly out of mind. Wives, children, and parents who had all sacrificed much over the previous years were able to bask in the glow of this herculean achievement. Lee was almost overcome by emotion during his speech as, from the podium, he could see such earth changing machines as the Britten V1000, the Pierce Four and others. Brian was just as overwhelmed, as he sat on the machine answering a barrage of questions about his design.

As with every ridgeline conquered at Motus, the celebrations soon turned to a manic ride, this time to Bike Week at Daytona to show the prototypes to a motorcycle crowd who knew almost nothing of their existence. The Daytona reveal was just as much a part of the ongoing testing—a chance to meet the world’s press and thousands of riders. With the prototypes fully loaded with data logging equipment, Pratt & Miller sent a team for support, and everyone moved into a big house on the beach for a week. From motorcycle legends like former World Superbike Champion Scott Russell, to domestic and foreign magazine editors stopping by for informal visits, the pace, as usual, was frenetic. The bikes were ridden to the racetrack, Main Street and beyond and engineers were downloading and analyzing data.

Founders’ maiden voyage on prototypes at Daytona Beach
Motus prototype launch team in Daytona

Everywhere the prototypes were seen and heard, the reaction was uplifting and energetic. It seemed like the whole country was learning about and cheering the scrappy company from Birmingham making history with their dreams. The prototypes performed flawlessly, and leaving Daytona on a high, none of the guys could have foreseen that they would one day face a serious hurdle because of this initial success.

Daytona Bike Week became Laguna Seca for MotoGP, and with another Motus house filled with journalists, photographers and friends, it soon became a staging point for the biggest test to date. With dealers signing on and customers making deposits, they decided to ride back to Alabama visiting dealerships along the way. Not only would it be a great opportunity to spend time with people, it would give invaluable test data for their return to the “woodshed” for further development during the upcoming year.

The enthusiastic reception to the prototypes continued from Alice’s Restaurant in NorCal to dealerships in Texas, Colorado, Tennessee and Georgia. They rode through scorching deserts, crossed high mountain passes in the Rockies, and ended up running hard and fast through the low swamplands to the west of their Birmingham home. They pulled all nighters to make sunrise at the Bonneville Salt Flats, put in an 1100-mile day, and burned the candle at both ends—as well as in the middle.

Left Fay Myers in Denver at 3pm Thursday, arrived at Bumpus H-D in Tennessee at 3pm Friday for a promotional event. Pic was taken somewhere in Kansas.

For Brian and Lee and the growing team at Motus, they had proved the motorcycle world was ready for a comfortable American sportbike powered by a big push-rod, hot-rod inspired engine. Now, the trick was to finish testing and work toward production.

Iron Butt Saddle Sore 1000/Bun Burner 1500 done!

We recently met Mr. Michael Kneebone, president of the Iron Butt Association, a community of serious long distance riders who sanction long rides including the 11-day, 11,000+ mile Iron Butt Rally™. Michael challenged us to be first to officially knock out one of their sanctioned rides on an Motus. Let’s just say he didn’t have to twist my arm very hard.

The Motus is built to “Go far, Go fast”, so the first chance I got, I grabbed the key to a demo MST and set out to tackle the Saddle Sore 1000 (1000 miles in 24 hours). The first 1000 miles passed pretty quickly, so I decided to push on and go for the Bun Burner 1500 (1500 miles in 36 hours), too.

I’m more of a twisty roads rider, but have to admit it was fun gathering the receipts and documenting the adventure using the IBA’s process. The Motus is so comfortable and stable at highway speeds, plus it has unholy passing power, so it just eats up miles with almost no effort. – Lee Conn

Stats:

6/10/17: Saddle Sore 1000 attempt (documentation submitted to IBA, not certified yet). 5:28am-8:13pm (14 hrs, 43 min) , 1061 total miles, avg speed 78mph.

6/11/17: Bun Burner 1500 (documentation submitted to IBA, not certified yet). 8:57am-4:20pm (7hrs, 23 min), 481 total miles, avg speed 77mph.

Total: 1548 miles in 22 hours and 6 minutes.

This nice family certified the SS1000 in Fosters, AL

Google Timeline for 6/10/17

Google Timeline for 6/11/17

No comment.

A filthy, but very capable and comfortable 2017 Motus MST after a hyper-tour. 

Burn Rubber This Summer Sales Incentive

Feel good riding the wheels off your new MST or MSTR this summer because Motus will provide your first replacement set of Pirelli Angel GT tires FREE!

Burn Rubber This Summer sales incentive is good for new Motus motorcycles sold between 6/9/17 and 7/15/17. Terms are as follows:

  • Motus will ship one set of Angel Pirelli GTs to the dealership of initial purchase upon request to info@motusmotorcycles.com. Simply provide your name, address, phone number, email, VIN, and dealer’s name.
  • To qualify, warranty registration/proof of purchase must be submitted to Motus by 7/15/17.
  • Incentive covers tires only, end user responsible for all install and shop fees.
  • Incentive not exchangeable for cash, alternate tire brands or tire sizes.
  • Valid at participating dealers only.
  • Reach out to a dealer here or email info@motusmotorcycles.com with additional questions.
  • Offer applies to new motorcycle sales only. Demo bikes (or any stock motorcycles sold with over 500 miles) or used motorcycles do not apply.

Gil M’s Factory Custom MSTR

Check out this one from the Motus Custom Shop and Hourglass Cycles in Atlanta. Congrats to Gil (that lucky dog!)…it’s stunning! Gil optioned his 2017 MSTR with trick PPG paint/lingerie exposing carbon fiber in all the right places, full Öhlins USA suspension, BST – BlackStoneTek carbon fiber rims, Pirelli Moto Angel GT’s, carbon fiber Akrapovic Exhaust System, Brembo monoblocks, HeliBars, Sargent Cycle Products, heated grips, Clearwater Lights, triple Powerlet Products, full LCD/TFT color display with cruise control, 180 hp American V4 and on and on and on….

FullerMotus custom awarded at “The Quail”

John Bennett and his son, Jackson, accept the Industry Award at the 9th Annual Quail Motorcycle Gathering. 

May 4, 2017, Carmel by the Sea, California- Fuller Moto’s custom MSTR received the Industry Award at the prestigious “Quail”. The 9th annual Quail Motorcycle Gathering celebrates the past, present and future of motorcycling. The Industry Award is presented to a ground-breaking and thought provoking motorcycle created and built by industry professionals to the highest standards. This award is selected by a prestigious Judging Committee and can be from any category on the field they believe best fits this description.

The “FullerMotus” was commissioned by John Bennett, a long time Motus rider looking to customize his 2015 MSTR.  Bryan Fuller and his team in Atlanta were retained to build the “ultimate streetfighter”, so they stripped away everything not absolutely necessary and lightened the bike by over 100 lbs. While still retaining about 80% original factory content, the bike posted impressive performance numbers without engine modifications (156 hp, 115 ft lbs to the wheel) and has a sound like no other.

Congrats to owner John Bennett and Byran Fuller of Fuller Moto!

What do you want to do with YOUR Motus?

Click the image below for dyno video. 

 

Motus welcomes industry veteran as SE Sales Manager

FOR IMMEDIATE RELEASE

Motus welcomes Donnie Hill as SE Sales Manager

Birmingham, Alabama, April 28, 2017 – Motus Motorcycles has hired industry veteran Donnie Hill has Southeast Sales Manager. Motus is growing its product line and distribution network and Mr. Hill brings considerable dealer development experience to support the expansion.

“We are proud to announce that Donnie Hill has joined Team Motus as Southeast Sales Manager. Donnie brings significant strategic insight and tactical experience earned over twenty successful years in the industry,” said Motus CEO Lee Conn.

Mr. Hill has enjoyed an impressive career in dealer development at a large OE as well as extensive experience at every level of individual dealerships. As the second of four regional managers Motus is hiring, Donnie will oversee business development in the Southeast US from Florida to North Carolina to Texas. In addition to new dealer acquisition, Donnie will continue to develop the current network of Authorized Motus dealers.

“I am so honored to join Team Motus. I’ve been blown away by the engineering, passion and thought behind the brand and, having seen some of what is to come next, I am excited to be a part of the growth going forward,” Donnie Hill, Motus Southeast Sales Manager.

Authorized Motus dealers are generally multi-line, premium motorcycle stores with Motus factory trained staff offering financing, test rides, customer trade-ins, etc. The opportunity to represent Motus is simple and very appealing for the right dealers. Motus is actively seeking dealers in certain open markets.

About Motus
Motus manufactures comfortable sportbikes designed to excel in performance, comfort and range. All Motus motorcycles – the MST and more premium MSTR – are powered by mighty V4 Baby Block® engines, combining high performance with low maintenance and a unique character that expresses the evolving heritage of the American motoring experience. Founded in 2008, Motus Motorcycles is a trademark of Birmingham Motorcycle Company, LLC. For more info about Motus, please visit: motusmotorcycles.com; email: info@motusmotorcycles.com; like: Facebook; or call: 205-208-9966.

###

For more information, please contact Robert Ohnich, (205) 208-9966 ext 101, rohnich@motusmotorcycles.com

Motus Overview and FAQ’s

Motus builds America’s only V4-powered sportbike, designed to excel in performance, comfort and range. After riding one, we think you’ll agree they are among the most satisfying motorcycles available. Each Motus is built to heirloom quality, using the finest materials and components in the world.

Motus means physical motion or movement, but can also mean a movement of people. For us, it’s Moto-US…Motus. 

Specs, FAQs, videos and articles below. Motus Owners Group here

The 2017 MST comes beautifully outfitted with the 165hp American V4 with cruise control, hand built chromoly space frame, hand laid composite and carbon fiber panels, Öhlins NIX forks, Brembo brakes, Galfer braided lines, wave rotors and Braking master cylinders, Akrapovic titanium mufflers, Sargent seat, HeliBars, OZ Racing forged aluminum rims, high color LCD/TFT display, billet triple clamps, GIVI luggage, center stand and a ton more. It weighs 590 lbs with 40 lbs fuel and 30 lbs of luggage. 5.5 gallon tank, 215-250 mile range. 2 year unlimited mileage warranty (extendable up to 6 years). Full MST specs here. The MST is $30,975.

The 2017 MSTR is the fastest production pushrod motorcycle in the world and holds the fastest land speed records of any American production motorcycle. 180hp American V4 with cruise control, hand built chromoly space frame, hand laid carbon fiber panels, BST carbon fiber wheels, Öhlins NIX forks and TTX monoshock, Brembo monoblock brakes, Galfer braided lines, wave rotors and Brembo RCS master cylinders, Akrapovic carbon fiber mufflers, Sargent seat, Rizoma sport bars, high color LCD/TFT display, billet triple clamps, GIVI luggage, center stand and a ton more. It weighs 580 lbs with 40 lbs fuel and 30 lbs of luggage. 5.5 gallon tank, 215-250 mile range. 2 year, unlimited mileage warranty (extendable up to 6 years). Full MSTR specs here. The MSTR is $36,975.

Motus Dealers. There are currently 31 high-caliber US dealers with more coming on-board all the time. All Motus dealers offer test rides, can arrange financing, take trades, and have factory trained techs.

Seat Height. Seat height is 31″ but the narrow front of the seat will allow a 30″ inseam to “flat foot”. A low seat is also offered.

Financing. Retail financing with great rates up to 84 months is available at all Motus dealers.

Warranty. 24 months, unlimited mileage with an extended warranty up to 6 years available.

Servicing a Motus. Any reputable motorcycle dealer can service a Motus. The motorcycles are simple to maintain, metric, and require no special tools.

Videos:

Motus on Jay Leno’s Garage

Motus in Motion

Motus: Race to the Starting Line

Cycle World Ride Review Part 1

Cycle World Ride Review Part 2

MOTORCYCLIST Ride Review

Two Wheel Obsession on-board ride review

Articles:

Motorcyclist review, Jul/Aug ’17

Rider magazine ride report

Motorcyclist magazine ride report

Ultimate Motorcycling ride report

Naked Motus by Fuller Moto debuts at Jekyll Island

Click any image for a full view. 

jekyll-9
This past weekend we traveled to Jekyll Island, GA for Caffeine & Octane at the Beach. We got to hang with friends and watch one very happy customer take delivery of his custom Motus built by Fuller Moto. If you wanted to know what’s under all those Sport-touring clothes, this is it. A 470-lb, 180 hp naked monster-slayer. Bryan Fuller and his team did an amazing job, as they do with all their projects.

The Pirelli/Motus sponsored ride on Friday led by Cristy Lee of “All Girls Garage” had a great turnout. Joining us were old friends and new, including Kevin Byrd of “Two Guys Garage”, Bryan Fuller, 11-time drag racing champion #62 Rickey Gadson, Stefan & Alan of Revival Cycles, and Peter Jones of Cycle World.

The Victory and Pontiac Effect.

IMG_0613-1

The Victory and Pontiac Effect

“This Motus rides like a dream, but will they be around in 5 years?”

We hear that a lot. And, it’s a fair question. Customers buying a Victory in 2016 or a Pontiac in 2007 probably didn’t consider their purchase risky from those brands. But, why not?

As entrepreneurs/patriots/motorcycle nuts, we are saddened by the demise of Victory Motorcycles, but not surprised. Polaris is an incredible American company making the best business decisions for shareholders, as they should. Maybe similar to decisions General Motors made with Pontiac.

Conceived in Polaris’ boardrooms to grab some of the (then growing) v-twin market, Victory remained target fixated as demand for heavy cruisers shrank by half. At the same time, the European brands grew like wildfire by offering appealing bikes in other segments- and there was no American competition. While Victory marketing showed intriguing sportbike concepts under the fuzzy brand promise of an “inextinguishable passion for American performance”, Victory dealers only offered 800 pound/90hp cruisers.

So, what does any of this have to do with Motus? The Motus customer seeks a comfortable American sportbike and values attention to detail, premium quality, and character. For riders with a Motus already in their garage, the test ride sealed the deal. As long as we remain laser focused on providing an incredible customer experience, we will continue to grow and launch additional models in segments that complement our brand promise.

With Victory gone, some great motorcycle dealers are starting to look for alternative lines to represent. We hope that Motus – with our V4-powered, comfortable American sportbikes – will make sense for them and their customers.

Motorcyclists gladly accept more risk than “regular” people as we pursue the magic that is only experienced on two wheels. Every week, riders join the growing Motus family and we are deeply grateful they share our vision.

-Brian Case and Lee Conn, co-founders

Facebook: @motusmotorcycles @ridemotus @AmericanV4

Instagram: @motus_motorcycles

Web: www.motusmotorcycles.com

Mike M’s Carbon Footprint.

Here’s a little photo album of a custom MSTR built for composites expert, Mike M. After inspecting the quality of the unpainted carbon fiber on every Motus MSTR, Mike wanted his Motus to tell the whole story in a unique way. We were happy to oblige.

motus_carbon4

img_0224-1

img_0272-1-1

img_0235-1

20161216_142936-1

img_0125_01-1

img_0100_01-1

img_0092-1

img_1727-2

Industry Veteran John Alexander Joins Team Motus

 

john-alexander

FOR IMMEDIATE RELEASE

Motus welcomes industry veteran John Alexander as NE Sales Manager

Birmingham, Alabama, December 27, 2016 – Motus Motorcycles has hired industry veteran John Alexander as Northeast Sales Manager. Motus is growing its product line and distribution network and Mr. Alexander brings considerable dealer development experience to support the expansion.

“We are so proud to announce that John Alexander has joined Motus as Northeast Sales Manager. John brings an incredible amount of strategic and tactical experience earned over twenty five successful years in the industry,” said Motus Vice President Brian Case.

Mr. Alexander has enjoyed an impressive career in dealer development at Bombardier Recreational Products, Triumph Motorcycles, and Husqvarna Motorcycles. As the first of four regional managers Motus is hiring, John will oversee business development in the Northeast US from Maine to Virginia to Michigan. In addition to new dealer acquisition, John will continue to develop the current network of Authorized Motus dealers.

“I couldn’t be more excited about joining Motus as we grow from both product and dealer growth perspectives. The three-year plans are amazing and I have never seen a more capable, passionate group of riders and entrepreneurs. Team Motus has achieved an incredible amount so far, but we are just getting started,” John Alexander, Motus Northeast Sales Manager.

Authorized Motus dealers are generally multi-line, premium motorcycle stores with Motus factory trained staff offering financing, test rides, customer trade-ins, etc. The Motus opportunity is simple and very appealing for the right dealers and Motus is actively seeking dealers in certain markets.

About Motus
Motus manufactures comfortable sportbikes designed to excel in performance, comfort and range. All Motus motorcycles – the MST and more premium MSTR – are powered by mighty V4 Baby Block® engines, combining high performance with low maintenance and a unique character that expresses the evolving heritage of the American motoring experience. Founded in 2008, Motus Motorcycles is a trademark of Birmingham Motorcycle Company, LLC. For more info about Motus, please visit: motusmotorcycles.com; email: info@motusmotorcycles.com; like: Facebook; or call: 205-208-9966.

###

For more information, please contact Robert Ohnich, (205) 208-9966 ext 101, rohnich@motusmotorcycles.com

Midwest Motorcyclist Rides the MSTR

It’s the kind of motorcycle best described by two words you won’t often read together: hooligan sport-tourer. It incorporates the comfortable seating position and body work of a sport-touring motorcycle but underneath that carbon fiber is a fire-breathing small-block V-4 that could put your operator’s license at risk. – Ray Peabody, Editor, December 2016

http://midwestmotorcyclist.homestead.com/december_16_issue.pdf

midwest-motorcyclist-dec-2016

Bike Magazine rides the MST

“…their engine is as impressive as any I’ve tried in 25 years of road testing, a modern day hot-rod version of that sports touring classic, the VFR. It’s that good”- John Westlake, Bike Magazine

Click here or the image for the full article.

capture

 

 

New Hampshire to Seattle and back with track days before and after!

John C on his MSTR: New Hampshire to Seattle and back…with track days before and after! “Why a Motus? I wanted an exciting bike, fast, powerful, no-electronics, for sport-touring and maybe some track time.

Yup, I bought the right bike.

One of my nieces was getting married in Seattle and I, retired, was becoming a couch potato. So last March I bought a 2016 Motus MSTR from Adam RocketMoto in Nashua, NH, went to the gym for three months, then rode out to her wedding. Through Adam, co-owner of Rocket Moto Sport, I learned about Tony’s Track Days. They had two of these track days, one at NHMS before the wedding and one at Palmer Motorsports Park afterward. I went to both.
14224951_1240038479386120_3933343650312062458_n
The wedding trip was an adventure. I took a northern route through Canada to Sault Ste Marie, MI, across to the Badlands, then to Seattle and the wedding. Then I spent a few days in Mukilteo (pronounced MUCKle TEEoh) visiting three airplane museums. From there I wandered between Idaho and Montana playing with twisty roads and mountain passes, finally working my way down to the Denver area to visit a friend and relax for a few days.

I chose not to keep track of times and miles, but I know I knocked off some easy 500 mile days, starting late and stopping early. I like riding out west where speed limits are higher, roads are more open, and traffic seems to be somewhere else. The Motus gets good to excellent mileage (40-50+ mpg) at small throttle, lower speed, and higher gear, which I used when I thought I was going to run out of gas. I got over 50 mpg at 85 mph with a tailwind, but low 20s when going 85 into a headwind or just having fun.

Always the bike was fun to ride. If you’re into attention, this is the bike for you. I met more people this trip than on any other. But to feel the suspension working, the smoothness of the brakes, the tires grabbing pavement, the effortless acceleration ….” – John C

The above is from John C’s ride notes/story sent to Motus after the trip, edited for length and clarity, shortened for this format.

 

Ohio to Alaska and back.

Read below, friends. This is why we do what we do at Motus.

Bob H: Can the Motus handle a long road trip in remote conditions? Absolutely. Ohio to Alaska and back. I was stopped a lot by riders In Alaska who were not only aware of Motus but anxious to see one. I had one guy in Prince George, BC follow me to ask questions. I left with fresh rubber and the rear tire was shot after only 7000 miles. The chip sealed surface is really rough on tires and this is not just for Motus. I was able to get a Honda dealer on Great Falls, Montana to change out the rear. Great guys.

Fuel stops on the Alaska Highway and even more so on the Cassiar Highway are few and far between. The Motus has enough range to do it but frequently 87 octane was all you can get. The bike seemed to digest it well.

13923652_1094399603929423_2881843708933091529_o 13923437_1094399623929421_8559183343774396791_o

My First “Motus Moment”

13043580_1017015175000887_9074474966973574707_n

On Thu, May 12, 2016 at 9:41 AM, Steve Sxxxxx <xxxxxxxxxxx@gmail.com> wrote:

Hello,  Great to see you again at Hamlin Cycles – hopefully the ride home was uneventful.  I’m writing to share my first “Motus Moment” with you.  Earlier this week after work Tom and I went for a ride to the Saville Dam in western Connecticut.  It’s always great to spend some quality time riding with Tom.  We do this ride several times a year – it’s a beautiful area and only about a 2 hour round trip so we can be home before it gets dark.  You’ve seen Tom’s Suzuki GSX-S1000 – he loves the tight stuff and he generally rides more aggressively than I do.

On the way back, we took a different route that included a stretch with some nice twisties that we’ve ridden several times before when I was riding my K1600.  When I ride stretches of road like this, I’m generally so focused on the road and where I’m going that I don’t pay any attention to the tach/speedometer.  I’ll never set any speed records on these stretches (nor am I trying to) – I just ride within my abilities at a safe, brisk pace and have a good time.  As we rode through this stretch of twisties, I did catch Tom’s headlights in my mirrors a couple of times and wondered to myself why he was hanging back quite a bit farther than usual.  I love stretches of road like this so I had a big grin on my face the whole time.  On the way home, we stopped for a burger and I asked him about it.

Me: “How come you were hanging so far back in the twisties?”

Tom:  “You scared the heck out of me Dad.”

Me:  “What do you mean, why would you be scared?”

Tom:  “I’ve never seen you ride a motorcycle through corners like that.”

Me:  “It was just a brisk pace – we’ve done that same stretch of road before when I was riding my K1600.  I wasn’t doing anything crazy.”

Tom:  “Dad, when we hit 85 through a couple of the corners, I became worried so I backed off.”

Me:  “What are you talking about?  We weren’t doing anywhere near 85 – maybe 60 or 65 tops.”

Tom (very serious):  “Dad, no BS, you were doing 85 when I backed off…”

I thought about what Tom had shared with me for a minute and had my first real “Motus Moment”.  I’m not a “street racer” by any stretch and I know the Motus isn’t going to win any MotoGP races but I felt absolutely connected with the Motus through that stretch of road.  As I looked through the corners, the bike just tracked exactly where I wanted it to go and felt very stable.  No surprises, no wallowing – just rock solid and I never felt like I was over my head or on the ragged edge.  Did I mention I had a big grin on my face the whole time?

Hope all is well!

Best Regards,

Steve Sxxxxxxxxx

Motus is hiring!

Position: Motorcycle Assembly Technician
Function: Will perform assembly of the Motus MST series motorcycles
Industry Type: Automotive/Powersports/Manufacturing
Employment Type: Full time
Job Location: Birmingham, AL

Job Summary:
Motus is seeking a qualified, self-motivated individual to assemble new production motorcycles. The individual will be responsible for multiple aspects of the motorcycle final assembly, from suspension systems, brakes and electrical systems, to engines and fuel systems. This is an exciting opportunity for a disciplined, professional candidate to be a part of a brand new American motorcycle manufacturer, making America’s only V4 sport bike.

More details here:
Job Description – Motorcycle Assembly Technician3

Cycle World rides the Motus.

Every now and then a motorcycle comes along that, after the first few ham-fisted miles of riding, you just have to park on the side of the road, get off, and take a newly earned respectful look at. The Motus MST is one of those bikes– Cycle World, March 2016

"Every now and then a motorcycle comes along that, after the first few ham-fisted miles of riding, you just have to park on the side of the road, get off, and take a newly earned respectful look at. The Motus MST is one of those bikes"- Cycle World, March 2016

CityBike rides the Motus

When I first heard about the Motus, I wanted to hate it. It was probably another loud, high-priced, large displacement, macho trophy that could surely be outperformed by an SV650. But the MST and MSTR turned out to be better than I could ever have imagined, making this review oddly hard to write.-  Sam Devine, CityBike, February 2016

Click here or on the image to read the full article.Capture

Meet Mike.

Mike’s a Motus owner and a hardcore rider with a number of land speed records under his belt. His comments after riding his Desert Bronze MSTR from Pennsylvania to Alabama recently…e965b921-1959-4298-b5c7-249b68edb9ae